CP生料均化庫
丁寶勤 13906276368(技術)
電話:0513-88400999 傳真:0513-88400998 郵箱:jszk@vip.163.com
概述
CP生料均化庫特點是電耗低、均化效果好。CP庫的均化機理是庫頂生料通過8條斜槽均勻布料,不同時期的生料在庫內呈橫向分布,庫底充氣系 統設計更符合生料充氣后的流動性,呈放射狀斜向分布,環形區一般分8個區,每隔5分鐘輪流充 氣,充氣區生料因松動及氣流的引導卸入中心區,庫內不同層的生料豎向切割下料實現生料的均 化,不同時間的生料進入中心區后再進行氣體強烈混合均化,從而達到理想的均化效果。
Brief introduction
CP raw material homogenized silo is a new raw material homogenized silo that is introduced from Germany BMH Company. It is characterized by low power consumption and good homogenized effect. Homogenized principle: Raw material powder from raw material distributor of top silo is through 8 sets air slide which are radial arranged. Different time raw material has different homogenized effect in different material layer. The design of aerating system of bottom silo should distribute in slope and radiation. It will comply with flow request of raw material powder. Circular zone has 8pcs of aerating unit usually. It will be a circle every five minutes. Raw material in circular zone will flow toward center zone because of loose and airflow guide. As aerating strength of center zone is stronger, different time raw material powder enters center zone and they will have enough mixing and realize ideal homogenized effect.
序號 | 設備名稱 | 規格型號 | 數量 | 備注 |
1 | 庫頂生料多點卸料器 | Φ830、250t/h | 1套 | 工藝定 |
2 | 庫底卸料閥系統 | 200t/h | 2臺 | 工藝定 |
3 | 均化庫充氣管道及閘閥 |
| 1套 |
|
4 | 充氣系統控制閥 | DN100、DN80 | 6只8只 |
|
5 | 庫底開式充氣斜槽 |
| 220 |
|
6 | 計量倉 | 4000×5800mm | 1只 |
|
7 | 稱重倉卸料裝置 | 200t/h | 2套 |
|
8 | 充氣攪拌PLC控制柜 |
| 1臺 |
|